Firmware Hero
0

Zen Delay Guildfordia's Mod

An unofficial firmware mod for the Erica Synths Zen Delay (firmware 1.1.0): tap tempo with musical divisions, MIDI CC control, input send for dub throws, freeze, and a TAP LED that shows what the delay is doing.

  • Custom firmware
  • Stable
  • Medium brick risk
  • Reversible

Source codeWebsite: guildfordia.github.io

This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it

Before you start

How hard is it?
HardUses the command line or developer tools.
What you need
  • Comfort with the command line
  • A computer
Can it break my device?
Small chance of trouble, with a way to recover. It may void your warranty.
Can I undo it?
Yes. You can go back to the official software.
Open the installerOpens guildfordia.github.io

Did it work for you?

Did Zen Delay Guildfordia's Mod work on your Erica Synths Zen Delay?

No reports yet.

One-tap reports from owners. Bricked reports are checked before they count.

Compatibility

Devices: Erica Synths Zen Delay.

No compatibility information yet.

Getting started

From the project's README ("Installing"):

  1. Download the official update ZenDelayV1.1.0.wav from Erica Synths (Zen Delay support / firmware page).
  2. Patch it (Python 3 with numpy): pip install numpy python zenpatch.py ZenDelayV1.1.0.wav zendelayguildfordiamod.wav The patcher refuses any other file, checks its result and writes the modded update file.
  3. Flash it like an official update:
    • Zen off, hold TAP while powering on: TAP blinks fast = update mode.
    • IN LEVEL at 12 o'clock, cable into L IN, nothing in R IN.
    • Play the file unaltered at 48 kHz, from start to end (about 89 s). A computer's headphone output worked best for us; on macOS, python tools/hpflash.py zendelayguildfordiamod.wav does it (needs sounddevice). Audio interfaces / mixers work too but failed more often.
    • Slow TAP blink + yellow IN LEVEL LED = failed update. Nothing is broken: power-cycle into update mode and play the file again.
  4. Power-cycle normally (without TAP). Check: after a few taps, the TAP LED flashes on the beat.

The modded file uses longer pauses between memory blocks than the official one (3.5 s instead of 2.5 s): it gives the Zen more time to erase its flash and made updates much more reliable in our tests. Do not lengthen the short pauses after blocks 4 and 5: the bootloader takes a long silence there as the end of the update and starts a half-written program.

Read the full instructions

Risk and recovery

Brick risk
Medium
Reversible
Yes
Voids the warranty
Yes
Requires opening the device
No

From the project's README ("Going back to the official firmware"):

Flash ZenDelayV1.1.0.wav from Erica Synths the same way.

Read the full instructions