0
Загрузчик неподписанного кода для Yandex Station 2 (Yandex Max)
- Custom firmware
- Alpha
- High brick risk
This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it
Before you start
- How hard is it?
- HardUses the command line or developer tools.
- What you need
- A USB or MIDI cable
- Comfort with the command line
- A computer
- An SD card or USB stick
- Can it break my device?
- Could leave your device unusable.
- Can I undo it?
- The project doesn't say. Assume you can't.
Get itOpens github.com
Did it work for you?
Did Загрузчик неподписанного кода для Yandex Station 2 (Yandex Max) work on your Yandex Station?
No reports yet.
One-tap reports from owners. Bricked reports are checked before they count.
Compatibility
Devices: Yandex Station.
No compatibility information yet.
Getting started
From the project's README ("Как вытащить bl2 (и запустить)"):
- Берем ota обновление или загрузившись через pyamlboot из консоли дампим bootloader.img, либо через скрипт ./payloads/bootloaderdump.sh
- Из дампа берем bl2aeskey bl2ivkey и расшифровываем bootloader.img openssl enc -aes-256-cbc -nopad -d -K $(cat путькbl2aeskey)-iv $(cat путькbl2ivkey) -in bootloader.bin -out bootloaderdec.bin
- Далее распаковываем расшифрованный образ mkdir image && gxlimg -e ./bootloaderdec.bin ./image
- Обрезаем файл, чтобы уложиться в лимиты ./scripts/makebl2payload.sh -i ./image/bl2.sign -o ./payloads/bin/bl2payload.bin
- Запускаем устройство в DL MODE
- ./bootbl2.sh
Запустить свой образ bootloader можно с помощью ./bin/update bl2boot bootloader.bin
Risk and recovery
- Brick risk
- High
- Requires opening the device
- No
Credits, license and support
- License
- GPL-3.0