Firmware Hero
0

xgimi-clean

极米投影仪 (GMUI/m7221, NEW Z6X等) 去广告 / Root / 固件备份 工具包 —— 不刷机、可逆、保留官方最新固件

  • Root exploit
  • Stable
  • Low brick risk
  • Reversible

Source code

This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it

Before you start

How hard is it?
HardUses the command line or developer tools.
What you need
  • Comfort with the command line
  • A computer
  • An SD card or USB stick
Can it break my device?
Very unlikely to break anything. It may void your warranty.
Can I undo it?
Yes. You can go back to the official software.
Get itOpens github.com

Did it work for you?

Did xgimi-clean work on your XGIMI NEW Z6X?

No reports yet.

One-tap reports from owners. Bricked reports are checked before they count.

Compatibility

Devices: XGIMI NEW Z6X.

No compatibility information yet.

Getting started

From the project's README ("Quick start"):

  1. Prepare
  • A computer on the same LAN as the projector (Python 3 + adb)
  • A USB stick
  • Both APKs are in thirdparty/:

    • TermOne Plus (GPL-3.0) — terminal emulator, needs no network setup

    • Z7X-ADB opener (MIT) — makes adbd listen on 5555

  1. Generate your personal maintenance scripts python scripts/makescripts.py generates an SSH keypair (if none) and produces scripts/out/{g,p2,p3,p4} plus scripts/out/serve/ holding every file the projector will pull

  2. Serve them over HTTP cd scripts/out/serve python -m http.server 8000 --bind 0.0.0.0 # note your PC's IP, called <PCIP> below

  3. Sideload & open TermOne Plus on the projector (USB stick)

  4. Enable network ADB (Z7X-ADB opener) Install and run thirdparty/Z7X-ADB-v1.1.0.apk once. It sets persist.adb.tcp.port=5555 etc., so adbd listens on 5555. adb connect :5555 will show unauthorized at this point — expected; next step fixes it.

  5. Complete the root authorisation (inside TermOne) busybox wget -O g http://<PCIP>:8000/g;sh g # start the vendor root sshd busybox wget -O p2 http://<PCIP>:8000/p2;sh p2 # run maintenance script as root busybox wget -O p3 http://<PCIP>:8000/p3;sh p3 # ADB key + make block devices readable After p3 done, on the computer: adb connect <projector IP>:5555 # now shows "device" (authorised)

  6. De-bloat bash post/debloat.sh <projector IP>:5555 # remove ad components + disable OTA bash post/backupfw.sh <projector IP>:5555 # full firmware backup (strongly recommended first) …

Read the full instructions

Risk and recovery

Brick risk
Low
Reversible
Yes
Voids the warranty
Yes
Requires opening the device
No

From the project's README ("What gets removed"):

PackagePurposeAction
com.xgimi.adservicead service coreuninstall
com.xgimi.atmosphereambient / music-wall adsuninstall
com.xgimi.screensaverscreensaver adsuninstall
com.xgimi.datareporterbehavioural telemetryuninstall
com.xgimi.activitypagepop-up promotionsuninstall
com.xgimi.upgradesystem updater (blocks OTA re-installing ads)disable (reversible)

All removals are --user 0 level; restore with post/restore.sh (one command, or per package).

Optional extra: swap in a third-party launcher for an ad-free home (tested with EMOTN UI, com.oversea.aslauncher), and switch back to the stock GMUI launcher at any time — see docs/04-debloat.md or bash post/restore.sh :5555 home.

Hardware services you must NOT touch — keystone correction, ToF autofocus, the HDMI input player, the MStar input/hotkey stack, remote pairing — are documented in docs/04-debloat.md, cross-checked against the overseas XGIMI DO-NOT-DISABLE lists of the cleanyourtv project.

Read the full instructions

Credits, license and support

License
MIT