TRIG pages (Digitakt mk1)
More TRIG sub-pages for the Digitakt mk1, OS 1.53, where each audio track picks a generator: a mod that changes what the track's steps play.
- Custom firmware
- Alpha
- Medium brick risk
- Reversible
This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it
Before you start
- How hard is it?
- EasyCopy a file or use a web page. No extra software.
- What you need
- A USB or MIDI cable
- Comfort with the command line
- A computer
- Can it break my device?
- Small chance of trouble, with a way to recover.
- Can I undo it?
- Yes. You can go back to the official software.
Did it work for you?
Did TRIG pages (Digitakt mk1) work on your Elektron Digitakt?
No reports yet.
One-tap reports from owners. Bricked reports are checked before they count.
Compatibility
Devices: Elektron Digitakt.
No compatibility information yet.
Getting started
From the project's README ("Build"):
seq-events is in elekloader (mods/seq-events-dt1); build it the same way.
python -m elekloader.sdk.build . --stock DigitaktOS1.53.syx # -> out/trig-pages-0.1.elemod python -m elekloader.lint out/trig-pages-0.1.elemod --stock DigitaktOS1.53.syx
--with core-4.0.elemod --with seq-events-0.1.elemod
Risk and recovery
- Brick risk
- Medium
- Reversible
- Yes
- Requires opening the device
- No
From the project's README ("Status"):
0.1: built and linked by elekloader with core 4.0 and seq-events 0.1, alone, with TURING, and beside every mod of this set (digislicer, euclid, duck, GRAIN, WAVE, CUT). Not yet run. Things to check on the first run:
- TRIG pressed again: 2/2 (GEN OFF), the title, the GEN knob; with TURING 2/3 and 3/3, and back to 1/3;
- on 2/3 the rings, labels and graphics where the stock page has them; a knob's value under it and in the header while it turns;
- A-H never change a trig on 2/3 or 3/3; LEVEL still works; the trig keys do;
- another track: its own generator; a track without one on 3/3 goes to 2/2;
- the settings back after a restart.
Planned: open on 2/3 when the track has a generator; values per pattern (core 4.0 has the room); the trig keys' LEDs showing what the generator plays.
The stock OS file always recovers the unit: hold [FUNC] while powering on, press [TRIG 4] for OS UPGRADE, and send the stock .syx with Transfer.
Credits, license and support
- License
- GPL-2.0