Firmware Hero
0

takt1ccname

An unofficial, community-made firmware mod for the Elektron Digitakt MKI (OS 1.53 and OS 1.54) that adds independent custom parameter names for each MIDI CC knob per track.

  • Custom firmware
  • Stable
  • Low brick risk

Source code

This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it

Before you start

How hard is it?
EasyCopy a file or use a web page. No extra software.
What you need
  • A USB or MIDI cable
  • Comfort with the command line
  • A computer
Can it break my device?
Very unlikely to break anything.
Can I undo it?
The project doesn't say. Assume you can't.
Get itOpens github.com

Did it work for you?

Did takt1ccname work on your Elektron Digitakt?

No reports yet.

One-tap reports from owners. Bricked reports are checked before they count.

Compatibility

Devices: Elektron Digitakt.

No compatibility information yet.

Getting started

From the project's README ("Flashing to Hardware"):

  1. Connect your Digitakt to your computer via USB.
  2. On the Digitakt, navigate to [SETTINGS] > SYSTEM > OS UPGRADE ("Waiting for SysEx").
  3. Send the .syx file using amidi (Linux) or Elektron Transfer: amidi -p hw:7,0,0 -s out/DigitaktOS1.54fulldigi1modsccname.syx
  4. The Digitakt will verify the package, write to flash, and reboot automatically.

Read the full instructions

Risk and recovery

Brick risk
Low
Requires opening the device
No