Firmware Hero
0

reslicer

Reslicer is allowing to use musical sizes like 1/8T and randomize order for slices in DigiTakt

  • Custom firmware
  • Beta
  • Low brick risk

Source code

This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it

Before you start

How hard is it?
EasyCopy a file or use a web page. No extra software.
What you need
  • A USB or MIDI cable
  • Comfort with the command line
  • A computer
Can it break my device?
Very unlikely to break anything.
Can I undo it?
The project doesn't say. Assume you can't.
Get itOpens github.com

Did it work for you?

Did reslicer work on your Elektron Digitakt?

No reports yet.

One-tap reports from owners. Bricked reports are checked before they count.

Compatibility

Devices: Elektron Digitakt.

No compatibility information yet.

Getting started

From the project's README ("Install"):

You need three things:

  • elekloader:
    • Windows: download elekloader--windows.zip from elekloader's releases, unzip it and run elekloader.exe. The core mod, which every linkable mod needs, is built in.
    • Other systems: run elekloader from source with Python 3.9 or newer (see its README). There you also need core 4.0 for your OS, plus machine-pages 1.2 and seq-events 0.1. They are mods in elekloader's source (mods/core, mods/machine-pages, mods/seq-events-dt1), each built by python -m elekloader.sdk.build, and the releases carry the core. reslicer needs all three: core for the machine slots, machine-pages to draw the page and extend the GRID knob past 64, seq-events for the step counter. This is what reslicer 1.0 is built and checked against.
  • This mod, from this repository's releases: reslicer-1.0.elemod for OS 1.53, reslicer-1.0-os1.54.elemod for OS 1.54. They are the same mod.
  • The stock OS file your unit runs: DigitaktOS1.54.syx or DigitaktOS1.53.syx, from Elektron's Digitakt downloads. elekloader recognises it by its hash, and refuses a mod file made for the other OS.

Then build your OS in elekloader's window:

  1. Change stock firmware... (top right): choose your stock OS file.
    • Install from file...: choose the reslicer file for that OS, and core, machine-pages and seq-events the same way. From source, install core the same way.
  3. Tick reslicer. Its three requirements are ticked with it. The …

Read the full instructions

Risk and recovery

Brick risk
Low
Requires opening the device
No

Credits, license and support

License
GPL-2.0