qingping-co2-research
Custom firmware for a Qingping Air Monitor Lite (CGDN1) plus a desk display that shows its readings.
- Custom firmware
- Alpha
- High brick risk
- Not reversible
This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it
Before you start
- How hard is it?
- HardUses the command line or developer tools.
- What you need
- A USB or MIDI cable
- Comfort with the command line
- A computer
- Can it break my device?
- Could leave your device unusable.
- Can I undo it?
- Not easily. Treat it as permanent.
Did it work for you?
Did qingping-co2-research work on your Qingping Air Monitor Lite?
No reports yet.
One-tap reports from owners. Bricked reports are checked before they count.
Compatibility
Devices: Qingping Air Monitor Lite.
No compatibility information yet.
Getting started
From the project's README ("Building / flashing"):
cd qingping-fw pio run # -> .pio/build/qingping/firmware.bin, upload it in configuration mode pio run -t upload # serial, see below
Serial flashing needs the case open: USB-serial adapter on the board's UART, and the board has no auto-reset, so enter download mode by hand (hold IO0, tap EN, release IO0) before uploading. Port and flags are in platformio.ini.
Risk and recovery
- Brick risk
- High
- Reversible
- No