PUMP for Digitakt
A levelling compressor on everything the Digitakt plays: turn it on and the mix comes up louder, denser and glued, with a pump that breathes with the beat.
- Custom firmware
- Stable
- Medium brick risk
- Reversible
This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it
Before you start
- How hard is it?
- EasyCopy a file or use a web page. No extra software.
- What you need
- A USB or MIDI cable
- Comfort with the command line
- A computer
- Another hack installed first
- Can it break my device?
- Small chance of trouble, with a way to recover.
- Can I undo it?
- Yes. You can go back to the official software.
Did it work for you?
Did PUMP for Digitakt work on your Elektron Digitakt?
No reports yet.
One-tap reports from owners. Bricked reports are checked before they count.
Compatibility
Devices: Elektron Digitakt.
No compatibility information yet.
Getting started
From the project's README ("Install"):
In the elekloader app, add both files for your OS from elemods/: core-4.1-os1.54.elemod and pump-dt-1.3-os1.54.elemod (or the two -os1.53 files), build, and send the firmware to the Digitakt. From the command line:
python -m elekloader.patch --stock DigitaktOS1.54.syx
--mod elemods/core-4.1-os1.54.elemod --mod elemods/pump-dt-1.3-os1.54.elemod --out Digitaktpump.syxIt combines with digihealth (its FAST AUDIO too), Digi Mono, DH-101 and machine-pages, with the LØST LVLS boot splash, and with DIGISNAKE for Digitakt (tested together on a unit).
Risk and recovery
- Brick risk
- Medium
- Reversible
- Yes
- Requires opening the device
- No
From the project's README ("PUMP for Digitakt"):
An SP-303 Vinyl Sim-style master compressor for the Elektron Digitakt mk1, as an elekloader mod (id pump-dt), in place of the Digitakt's stock compressor. A levelling compressor on everything the Digitakt plays: turn it on and the mix comes up louder, denser and glued, with a pump that breathes with the beat. It takes the Compressor's page among the master pages and is on every output: main outs, headphones and USB.
By Robbie (designed and tested on a Digitakt mk1, OS 1.54). GPL-2.0-or-later.
This is the Digitakt version. For the Digitone mk1, use PUMP for Digitone instead: the same compressor and page, on a master page of its own. The files here do not run on a Digitone, and the Digitone's do not run on a Digitakt.
> Unofficial and unsupported. Flashing modified firmware is at your own risk; the stock Digitakt OS always > recovers the unit (send the stock .syx from the boot menu).
What you need
Unit Digitakt mk1 (not the Digitakt II) OS 1.54 (tested). A 1.53 build is included, untested Mods elekloader's Digitakt core 4.1 (its master output and master pages), included here in elemods/ (the elekloader app does not ship 4.1 yet) Install
In the elekloader app, add both files for your OS from elemods/: core-4.1-os1.54.elemod and pump-dt-1.3-os1.54.elemod (or the two -os1.53 files), build, and send the firmware to the Digitakt. From the command line:
python -m elekloader.patch --stock DigitaktOS1.54.syx
…
Credits, license and support
- License
- GPL-2.0