Firmware Hero
0

portkit for the 1010music bitbox micro

Community patch for the 1010music bitbox micro 2.3.4: Fidelity, 24 dB SVF, clip stretch, FX3, master section (no firmware included)

  • Custom firmware
  • Stable
  • Medium brick risk
  • Reversible

Source code

This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it

Before you start

How hard is it?
EasyCopy a file or use a web page. No extra software.
What you need
  • Comfort with the command line
  • A computer
  • An SD card or USB stick
Can it break my device?
Small chance of trouble, with a way to recover. It may void your warranty.
Can I undo it?
Yes. You can go back to the official software.
Open the installerOpens kyrillleier-jpg.github.io

Did it work for you?

Did portkit for the 1010music bitbox micro work on your 1010music bitbox micro?

No reports yet.

One-tap reports from owners. Bricked reports are checked before they count.

Compatibility

Devices: 1010music bitbox micro.

No compatibility information yet.

Getting started

From the project's README ("Install"):

  1. Download the stock firmware 2.3.4 from 1010music and take the MICRO.BIN out of the zip.
  2. Open the patcher page, drop that MICRO.BIN on it and download the patched MICRO.BIN. Everything happens in your browser; nothing is uploaded. The page only accepts the unmodified 2.3.4 and checks the result against the tested build.
  3. Copy it to the root of the microSD card.
  4. Hold the white right arrow key while powering on to install.
  5. The splash shows portkit mod and version 2.3.4-pkZD.

Going back: the same steps with the stock MICRO.BIN.

Read the full instructions

Risk and recovery

Brick risk
Medium
Reversible
Yes
Voids the warranty
Yes
Requires opening the device
No

From the project's README ("Install"):

  1. Download the stock firmware 2.3.4 from 1010music and take the MICRO.BIN out of the zip.
  2. Open the patcher page, drop that MICRO.BIN on it and download the patched MICRO.BIN. Everything happens in your browser; nothing is uploaded. The page only accepts the unmodified 2.3.4 and checks the result against the tested build.
  3. Copy it to the root of the microSD card.
  4. Hold the white right arrow key while powering on to install.
  5. The splash shows portkit mod and version 2.3.4-pkZD.

Going back: the same steps with the stock MICRO.BIN.

Read the full instructions