Porte de poulailler automatique — Rétrofit Porte marque Omlet (FR)

Contrôleur basé sur ESP32 pour automatiser une porte de poulailler coulissante, en récupérant la mécanique d'une porte Omlet Autodoor existante.

Hardware mod
Stable
Medium brick risk

Source code

This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it

Before you start

How hard is it?: ExpertMeans opening the device, soldering or special hardware.
What you need: A USB or MIDI cable
A computer
Tools to open the case
Can it break my device?: Small chance of trouble, with a way to recover.
Can I undo it?: The project doesn't say. Assume you can't.

Get itOpens github.com

Did it work for you?

Did Porte de poulailler automatique — Rétrofit Porte marque Omlet (FR) work on your Omlet Smart Automatic Chicken Coop Door?

No reports yet.

Works for me Didn't work

One-tap reports from owners. Bricked reports are checked before they count.

Did it work for you?

Did Porte de poulailler automatique — Rétrofit Porte marque Omlet (FR) work on your Omlet Smart Automatic Chicken Coop Door?

No reports yet.

One-tap reports from owners. Bricked reports are checked before they count.

Compatibility

Devices: Omlet Smart Automatic Chicken Coop Door.

No compatibility information yet.

Getting started

From the project's README ("Logiciel"):

Structure du projet

portepoulailler/ ├── portepoulailler.ino ← Logique principale (moteur, modes, MQTT, NVS) └── webserverv2.ino ← Serveur web + WebSocket + HTML embarqué

> Les deux fichiers .ino doivent être dans le même dossier. L'IDE Arduino les compile automatiquement ensemble.

Dépendances

Installer via le gestionnaire de bibliothèques Arduino :

Bibliothèque Auteur
PubSubClient Nick O'Leary
ArduinoJson Benoit Blanchon
BH1750 Christopher Laws
ESP Async WebServer ESP32Async (github.com/ESP32Async/ESPAsyncWebServer)
AsyncTCP ESP32Async (github.com/ESP32Async/AsyncTCP)

> ⚠️ Utiliser les forks ESP32Async et non les dépôts originaux me-no-dev (archivés).

Configuration Arduino IDE

Package ESP32 — ajouter dans Fichier → Préférences → URLs supplémentaires : https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/packageesp32index.json

Paramètres de carte :

Paramètre Valeur
Board ESP32 Dev Module
Upload Speed 921600
CPU Frequency 240MHz (WiFi/BT)
Flash Mode DIO
Flash Size 4MB (32Mb)
Partition Scheme DMinimal SPIFFS (1.9MB APP with OTA)
PSRAM Disabled

Bibliothèque	Auteur
PubSubClient	Nick O'Leary
ArduinoJson	Benoit Blanchon
BH1750	Christopher Laws
ESP Async WebServer	ESP32Async (github.com/ESP32Async/ESPAsyncWebServer)
AsyncTCP	ESP32Async (github.com/ESP32Async/AsyncTCP)

Paramètre	Valeur
Board	ESP32 Dev Module
Upload Speed	921600
CPU Frequency	240MHz (WiFi/BT)
Flash Mode	DIO
Flash Size	4MB (32Mb)
Partition Scheme	DMinimal SPIFFS (1.9MB APP with OTA)
PSRAM	Disabled

Read the full instructions

Risk and recovery

Brick risk: Medium
Requires opening the device: Yes