o3-303
- Custom firmware
- Alpha
- Low brick risk
This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it
Before you start
- How hard is it?
- HardUses the command line or developer tools.
- What you need
- Comfort with the command line
- A computer
- Can it break my device?
- Very unlikely to break anything.
- Can I undo it?
- The project doesn't say. Assume you can't.
Did it work for you?
Did o3-303 work on your Polyend Tracker?
No reports yet.
One-tap reports from owners. Bricked reports are checked before they count.
Compatibility
Devices: Polyend Tracker.
No compatibility information yet.
Getting started
From the project's README ("Build"):
The two repositories side by side (o3-sdk next to this directory, -DO3SDKDIR= otherwise):
git clone https://github.com/trak3r-os/o3-sdk.git git clone https://github.com/trak3r-os/o3-303.git cd o3-303
The host build needs CMake 3.24 or newer and a C++17 compiler; the image needs the ARM GNU toolchain 15.3.rel1.
cmake -S . -B build-host cmake --build build-host -j4 ctest --test-dir build-host --output-on-failure
the app in the simulator: PNG snapshots of the screen and the pads, and the audio as a WAV mkdir -p /tmp/o3303 build-host/app/o3303sim --scenario app/scenarios/boot.txt --out /tmp/o3303
the firmware image: build-mk66/app/o3303.ptf cmake -S . -B build-mk66 -DO3SDKPLATFORM=mk66 -DARMGNUROOT=<arm-gnu-toolchain-15.3.rel1 dir> cmake --build build-mk66 -j4
Risk and recovery
- Brick risk
- Low
- Requires opening the device
- No
Credits, license and support
- License
- GPL-3.0