Firmware Hero
0

JSMFelucca

Connect the FM-1 to a computer by USB, open the web installer in Chrome or Edge and press Install; no extra hardware is needed.

  • Custom firmware
  • Stable
  • Medium brick risk
  • Reversible

Source code

This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it

Before you start

How hard is it?
EasyCopy a file or use a web page. No extra software.
What you need
  • A USB or MIDI cable
  • A computer
Can it break my device?
Small chance of trouble, with a way to recover.
Can I undo it?
Yes. You can go back to the official software.
Get itOpens github.com

Did it work for you?

Did JSMFelucca work on your M-VAVE FM-1?

No reports yet.

One-tap reports from owners. Bricked reports are checked before they count.

Compatibility

Devices: M-VAVE FM-1.

No compatibility information yet.

Getting started

From the project's README ("Overview"):

Multi-engine synthesizer firmware for the M-VAVE FM-1, version 1.6.1. Connect the FM-1 to a computer by USB, open the web installer in Chrome or Edge and press Install; no extra hardware is needed. Installing is at your own risk: M-VAVE's updater or the installer's Return to official V15 takes you back. Try it in your browser, no FM-1 needed.

  • Install: web installer
  • Edit: web editor (Felucca-WebApp)
  • Read: the manual and the release notes are in the wiki
  • Build: BUILDING.md
  • Related: Felucca-Engines (the ANALOG, LOFI, TRIO, WHEEL and NOISE engines, MIT; still maintained) · felucca-bsp (the FM-1 hardware layer)

Read the full instructions

Risk and recovery

Brick risk
Medium
Reversible
Yes
Requires opening the device
No

From the project's README ("Overview"):

Multi-engine synthesizer firmware for the M-VAVE FM-1, version 1.6.1. Connect the FM-1 to a computer by USB, open the web installer in Chrome or Edge and press Install; no extra hardware is needed. Installing is at your own risk: M-VAVE's updater or the installer's Return to official V15 takes you back. Try it in your browser, no FM-1 needed.

  • Install: web installer
  • Edit: web editor (Felucca-WebApp)
  • Read: the manual and the release notes are in the wiki
  • Build: BUILDING.md
  • Related: Felucca-Engines (the ANALOG, LOFI, TRIO, WHEEL and NOISE engines, MIT; still maintained) · felucca-bsp (the FM-1 hardware layer)

Read the full instructions

Credits, license and support

License
GPL-3.0