0
FM-1 Transporter
Read and write the flash of the M-VAVE FM-1 (JieLi AC791N / WL82) from a computer, through a small RP2040/RP2350 board wired to the FM-1's USB lines.
- Custom firmware
- Stable
- Medium brick risk
This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it
Before you start
- How hard is it?
- ExpertMeans opening the device, soldering or special hardware.
- What you need
- A USB or MIDI cable
- Comfort with the command line
- A computer
- Tools to open the case
- Can it break my device?
- Small chance of trouble, with a way to recover.
- Can I undo it?
- The project doesn't say. Assume you can't.
Open the installerOpens kurogedelic.github.io
Did it work for you?
Did FM-1 Transporter work on your M-VAVE FM-1?
No reports yet.
One-tap reports from owners. Bricked reports are checked before they count.
Compatibility
Devices: M-VAVE FM-1.
No compatibility information yet.
Getting started
From the project's README ("Install"):
- Download the UF2 for your board from Releases.
- Hold BOOTSEL, plug the board in, and copy the UF2 to the RPI-RP2 drive.
- Get wl82loader.bin from jl-uboot-tool. It is not included here; it is sent to the board's RAM when you use the tool.
Risk and recovery
- Brick risk
- Medium
- Requires opening the device
- Yes
Credits, license and support
- License
- MIT