diginular
Digitakt granular machine. An elekloader mod that adds GRAIN, a granular SRC machine, to the Elektron Digitakt (mk1, OS 1.54).
- Custom firmware
- Alpha
- Medium brick risk
- Reversible
This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it
GRAIN, a granular SRC machine for the Digitakt mk1, OS 1.54 (core 3.0+ and machine-pages 1.2). Build your OS with elekloader from your own stock Digitakt_OS1.54.syx: see the README. No firmware is distributed. Changes: CHANGELOG.md.
🤖 Generated with Claude Code
Before you start
- How hard is it?
- EasyCopy a file or use a web page. No extra software.
- What you need
- A USB or MIDI cable
- Comfort with the command line
- A computer
- Another hack installed first
- Can it break my device?
- Small chance of trouble, with a way to recover.
- Can I undo it?
- Yes. You can go back to the official software.
Did it work for you?
Did diginular v0.10.0 work on your Elektron Digitakt?
No reports yet for v0.10.0.
One-tap reports from owners. Bricked reports are checked before they count.
Compatibility
Devices: Elektron Digitakt.
No compatibility information yet.
Getting started
From the project's README ("Install"):
You need elekloader from source (Python 3.9+), the stock DigitaktOS1.54.syx from Elektron, and from elekloader's releases core 4.0 (3.0 or later) and machine-pages 1.2, for OS 1.54. Then:
python -m elekloader.patch --stock DigitaktOS1.54.syx
--mod core-4.0-os1.54.elemod --mod machine-pages-1.2-os1.54.elemod
--mod diginular-0.10.0-os1.54.elemod
--out DigitaktOS1.54-diginular.syx --version DGNRAdd the other machines you use (DigiSlicer, DT-FM, Digi Mono, ...) with more --mod; run it with --check first to see that they combine. Send the .syx with Elektron Transfer, or on Linux with Elektroid (elektroid-cli upgrade FILE.syx DEVICE), and press YES on the unit.
Recovery: elekloader never changes the bootloader. Hold FUNC while powering on, TRIG 4 (OS UPGRADE), and send the stock .syx over DIN MIDI with Transfer's legacy OS upgrade.
Never share a built .syx: it holds Elektron's firmware. Share the .elemod and the command.
Risk and recovery
- Brick risk
- Medium
- Reversible
- Yes
- Requires opening the device
- No
From the project's README ("Install"):
You need elekloader from source (Python 3.9+), the stock DigitaktOS1.54.syx from Elektron, and from elekloader's releases core 4.0 (3.0 or later) and machine-pages 1.2, for OS 1.54. Then:
python -m elekloader.patch --stock DigitaktOS1.54.syx
--mod core-4.0-os1.54.elemod --mod machine-pages-1.2-os1.54.elemod
--mod diginular-0.10.0-os1.54.elemod
--out DigitaktOS1.54-diginular.syx --version DGNRAdd the other machines you use (DigiSlicer, DT-FM, Digi Mono, ...) with more --mod; run it with --check first to see that they combine. Send the .syx with Elektron Transfer, or on Linux with Elektroid (elektroid-cli upgrade FILE.syx DEVICE), and press YES on the unit.
Recovery: elekloader never changes the bootloader. Hold FUNC while powering on, TRIG 4 (OS UPGRADE), and send the stock .syx over DIN MIDI with Transfer's legacy OS upgrade.
Never share a built .syx: it holds Elektron's firmware. Share the .elemod and the command.
Releases
| Version | Name | Released |
|---|---|---|
| v0.10.0 | diginular 0.10.0Latest | 20 October 2026 |
Credits, license and support
- License
- GPL-2.0