Firmware Hero
0

analoghealth

A diagnostics mod for the Elektron Analog Rytm MKII (OS 1.74) and Analog Four MKII (OS 1.56): irpina's digihealth for the Digitakt mk1, ported to the two analog machines.

  • Custom firmware
  • Stable
  • Medium brick risk
  • Reversible

Source code

This project hasn't been claimed by its maintainer yet, so its details come from the community. Is it yours? Claim it

Before you start

How hard is it?
EasyCopy a file or use a web page. No extra software.
What you need
  • A USB or MIDI cable
  • Comfort with the command line
  • A computer
  • Another hack installed first
Can it break my device?
Small chance of trouble, with a way to recover.
Can I undo it?
Yes. You can go back to the official software.
Get itOpens github.com

Did it work for you?

Did analoghealth work on your Elektron Analog Rytm MKII?

No reports yet.

One-tap reports from owners. Bricked reports are checked before they count.

Compatibility

Devices: Elektron Analog Rytm MKII.

No compatibility information yet.

Getting started

From the project's README ("Install"):

You need:

  • elekloader with the device's core (see elekloader); from source, build it with python -m elekloader.sdk.build mods/core-ar2 --stock Analog-RytmMKIIOS1.74.syx or mods/core-a4 --stock Analog-FourMKIIOS1.56.syx.
  • This mod, built from source (below).
  • The stock OS file, Analog-RytmMKIIOS1.74.syx or Analog-FourMKIIOS1.56.syx, from Elektron's downloads. elekloader recognises it by its hash.

python -m elekloader.patch --stock Analog-RytmMKIIOS1.74.syx
--mod core-0.4.elemod --mod out/analoghealth-1.3.elemod
--out Analog-RytmMKIIOS1.74-health.syx --version AH13 python -m elekloader.patch --stock Analog-FourMKIIOS1.56.syx
--mod core-0.1.elemod --mod out/a4/analoghealth-1.2.elemod
--out Analog-FourMKIIOS1.56-health.syx --version AH12

Flash it with Elektron Transfer, as for any OS update, and don't turn the unit off until the upgrade is done. Recovery: elekloader never changes the bootloader, so the stock OS file always restores the unit (hold FUNC while powering on for the startup menu, then OS UPGRADE).

Read the full instructions

Risk and recovery

Brick risk
Medium
Reversible
Yes
Requires opening the device
No

From the project's README ("Install"):

You need:

  • elekloader with the device's core (see elekloader); from source, build it with python -m elekloader.sdk.build mods/core-ar2 --stock Analog-RytmMKIIOS1.74.syx or mods/core-a4 --stock Analog-FourMKIIOS1.56.syx.
  • This mod, built from source (below).
  • The stock OS file, Analog-RytmMKIIOS1.74.syx or Analog-FourMKIIOS1.56.syx, from Elektron's downloads. elekloader recognises it by its hash.

python -m elekloader.patch --stock Analog-RytmMKIIOS1.74.syx
--mod core-0.4.elemod --mod out/analoghealth-1.3.elemod
--out Analog-RytmMKIIOS1.74-health.syx --version AH13 python -m elekloader.patch --stock Analog-FourMKIIOS1.56.syx
--mod core-0.1.elemod --mod out/a4/analoghealth-1.2.elemod
--out Analog-FourMKIIOS1.56-health.syx --version AH12

Flash it with Elektron Transfer, as for any OS update, and don't turn the unit off until the upgrade is done. Recovery: elekloader never changes the bootloader, so the stock OS file always restores the unit (hold FUNC while powering on for the startup menu, then OS UPGRADE).

Read the full instructions

Credits, license and support

License
GPL-2.0